en
Berg – die Energieoptimierer® Clip-on flow sensors
CLAMP-ON SENSORS 

In addition to recording the consumption of electricity and natural gas, flow and heat quantity measurements are playing an increasingly important role in energy optimization and compliance with climate and energy goals.
With the clamp-on flow sensors you can quickly and precisely monitor both liquid and viscous media such as: E.g. water, oil or chemicals.

With the FD model series, you can record the measurement data without interfering with the piping system and therefore without interrupting operations. The sensors are simply clamped to the outside of the pipe and enable flow monitoring. This eliminates any negative effects on the fluids and pipes. This means that all measurements are 100% contamination-free and 100% hygienic.

FD-H clamp-on sensor 

The clamp-on flow sensor FD-H records the flow and temperature of almost all liquids (water, highly viscous liquids, chemicals, etc.) in metal and plastic pipes. It can be installed quickly and easily during ongoing operations without interrupting production and is therefore also suitable for temporary measurements. Optionally, heat quantities can also be recorded with the clamp-on flow sensor using two temperature sensors.

    Characteristics
    • High communication range
    • One-touch commissioning for safe and flexible configuration
    • User-friendly interface
    • High measurement accuracy
    • Guaranteed battery life of at least 12 years
    Technical data
    Supported pipe materials Metal, hard plastic
    Supported fluid substances All liquids (water, oil, chemicals, etc.)
    Medium temperature 0 °C to 85 °C (no icing on the pipe surface)
    Display QVGA 2.0″ LCD color monitor, LED status display
    Communication IO-Link
    Outputs Pulse, analogue 4-20 mA
    I/O power connector M12 8 pin connector
    Supply voltage 20-30 VDC
    Protection class IP65
    Measurement accuracy 0.3% (measuring range between 0% and 10%) 

    3% (measuring range between 10% and 100%)

    Integration into Efficio via pulse capture module BCM 4/BCM 8
    and optocoupler or via I/0-Link master
    Variant and tender text
    Accesories
    FI-T50 Temperaturfühler Item number: 005105
    Unterstützter Rohrdurchmesser: 1 ¼“, 1 ½“, 2″ (d 38-70 mm)
    Unterstützte Rohrmaterialien: Metall
    Offerlist Tender Text

FD-R clamp-on sensor 

Designed for indoor and outdoor use, the FD-R flow sensor is suitable for monitoring water, oils, chemicals and high-pressure fluids at temperatures of -20°C and +120°C. Optionally, heat quantities can also be recorded with the clamp-on flow sensor using two temperature sensors.

Thanks to the quick installation using a simple clamping mechanism, there are no production downtimes during ongoing operations, as well as the risk of contamination, leaks or pressure losses.

The device can be mounted on a variety of pipes and pipe materials including stainless steel, iron, copper, PVC and plastic. It is also ideal for short-term or mobile measurements.

    Characteristics
    • Robust and durable construction – ideal for industrial environments
    • Simple clamping mechanism without intervention in the pipe system
    • No maintenance required
    • Fast and cost-effective assembly
    • precise detection of flow media
    • integrated temperature monitoring
    • Recording function through integrated data storage
    • Also suitable as a temporary measurement
    • Measurement of liquids and heat quantities
    Technical data
    Supported pipe diameters 44mm – 220mm
    Supported pipe materials metal, plastics
    Supported fluid substances various liquids (water, oil, chemicals)
    Medium temperature – 20 °C to +120 (no icing on the outer wall)
    Display 2-line display
    Communication IO-Link
    Outputs Pulse, analogue 4-20 mA
    I/O power connector M12 4 pin connector
    Supply voltage 20-30 VDC
    Protection class IP65/67
    Measurement accuracy 2% – between 20% and 100% v. E
    0.4% – between 6% and 20% abv. E
    Integration into Efficio via pulse capture module BCM 4/BCM 8 and optocoupler or via I/0-Link master

     

    Variant and tender text
    Accesories
    FI-T50 Temperaturfühler Item number: 005105
    Unterstützter Rohrdurchmesser: 1 ¼“, 1 ½“, 2″ (d 38-70 mm)
    Unterstützte Rohrmaterialien: Metall
    Offerlist
    Tender Text

Send Mail
Send Mail info@berg-energie.de
Contact now
Contact now
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.