en
Berg – die Energieoptimierer® GATEWAYS & SIGNAL CONVERTERS Gateways translate network protocols of a system by converting incoming information in such a way that another system understands it. Signal converter change the format of the input signals into the desired output format.

BCM 4 M-Bus

For the combined recording of 4 S0 pulse counters and machine running times. The multiocounter module is designed for data transmission in the M-Bus format.

    Characteristics
    • Counter module with 4 separate S0 channels according to EN 62053-31
    • Communication variant: M-Bus
    • DIN rail mounting according to IEC 60715
    • 3 TE width
    • Suitable for contacts and open collector transistors
    • Channels for counting machine running times can be programmed
    Technical data
    Case according to DIN 43880, material PPO self -extinguishing
    Dimensions W: 53 mm (3TE), H: 90 mm (including connector), D: 58 mm
    Assembly on DIN rail according to EN 50022
    Protection class IP20
    Connections S0 inputs: 1 x 8 pin. Screw plug-in terminals, pitch 5.08, bus: 2 x 2-pole. Screw-in terminals, pitch 3.81
    Supply 24 VDC +/- 5 %
    Current consumption max. 60 mA
    Inputs 4 x S0 Klasse A nach EN 62053-31
    S0 voltage 15.5V idle
    S0 line current 4 x ca.14 mA max.
    Active Input IS0 >10mA
    Inactive input IS0 < 2mA
    Debounce time ca. 8 msec
    Temperature range -10 °C bis -55 °C
    Baud rates 300, 2400, 9600 Bit/s (Default: 2400 Bit/s)
    Bus load 1 unit load (approx. 1.5mA)
    Number of logical 4M bus slaves 4
    Slave function 4 x counters, 32bit dual
    Max. Counting frequency 50Hz
    Data transfer M-Bus according to EN 1434
    Variant and tender text
    BCM 4 M-Bus Item number: 003773
    Impulserfassungsmodul für bis zu vier S0 Impulszähler
    und Konvertierung der Impulsstände in das M-Bus Protokoll
    Offerlist Tender Text

BCM 8 DP

S0 pulse acquisition module for transmitting consumption values from up to 8 intermediate meters into the Profibus DP protocol

    Characteristics
    • Counter module with 8 separate S0 channels according to EN 62053-31
    • Communication variant: Profibus DP
    • DIN rail mounting according to IEC 60715
    • 6 TE width
    • Suitable for contacts and open collector transistors
    • Channels for counting machine running times can be programmed (depending on the model)
    Technical data
    Case according to DIN 43880, material PPO self -extinguishing
    Dimensions B: 106 mm (6TE), H: 115 mm (inkl. Steckverbinder), T: 63 mm
    Assembly on DIN rail according to EN 50022
    Protection class IP20
    Connections S0 inputs: 2 x 8 pin. Screw plug-in terminals, pitch 5.08, bus: 2 x 2-pole. Screw-in terminals, pitch 3.81
    Supply 24 VDC +/- 5%
    Current consumption max. 350 mA bei 24VDC
    Inputs 8 x S0 Class A according to EN 62053-31
    S0 voltage 18V idle
    S0 line current 8 x ca.17 mA max.
    Active Input IS0 >10mA
    Inactive input IS0 < 2mA
    Debounce time ca. 8 msec
    Temperature range -10 °C bis -55 °C
    Baud rates 300, 2400, 9600 Bit/s (Default: 2400 Bit/s)
    Bus load 1 unit load (approx. 1.5mA)
    Number of logical 4M bus slaves 4
    Slave function 8 x Counter, 32Bit dual
    Max. Counting frequency 50Hz
    Data transfer S0 on ProfibusDP
    Data interface Profibus DP, SUB-D 9pol. According to EN 50170,
    Baud rates up to 12 Mbaud
    DP assignment 32 bytes E-periphery, 32 byte A-periphery
    Variant and tender text
    BCM 4 M-Bus Item number: 003773
    Impulserfassungsmodul für bis zu vier S0 Impulszähler
    und Konvertierung der Impulsstände in das M-Bus Protokoll
    Offerlist
    Tender Text

BCM 8 Modbus

For the combined recording of S0 pulse counters and machine running times. The multicounter module is designed for data transmission in the ModbusRTU protocol.

    Characteristics
    • Counter module with 8 separate S0 channels according to EN 62053-31
    • Communication variant: ModbusRTU
    • DIN rail mounting according to IEC 60715
    • 6 TE width
    • Suitable for contacts and open collector transistors
    • Channels for counting machine running times can be programmed (depending on the model)
    Technical data
    Case according to DIN 43880, material PPO self -extinguishing
    Dimensions B: 106 mm (6TE), H: 115 mm (inkl. Steckverbinder), T: 63 mm
    Assembly on DIN rail according to EN 50022
    Protection class IP20
    Connections S0 inputs: 2 x 8 pin. Screw plug-in terminals, pitch 5.08, bus: 2 x 2-pole. Screw-in terminals, pitch 3.81
    Supply 24 VDC +/- 5%
    Current consumption max. 350 mA bei 24VDC
    Inputs 8 x S0 Class A according to EN 62053-31
    S0 voltage 18V idle
    S0 line current 8 x ca.17 mA max.
    Active input IS0 > 10mA
    Inactive input IS0 < 2mA
    Debounce time ca. 8 msec
    Temperature range -10 °C bis -55 °C
    Baud rates 300, 2400, 9600 Bit/s (Default: 2400 Bit/s)
    Bus load 1 unit load (approx. 1.5mA)
    Number of logical 4M bus slaves 4
    Slave function 8 x Counter, 32Bit dual
    Max. Counting frequency 50Hz
    Data transfer S0 / machine runtimes on ModbusRTU
    Data formats DWORD (32 bit dual), real single precision
    Baud rates 300 … 57.6k
    Transmission media RS485, connection via screw terminals
    Termination Fail Save, can be switched on/off via jumper
    Variant and tender text
    BCM 8 Profibus DP Item number: 000595
    Impulserfassungsmodul für bis zu acht S0 Impulszähler
    und Konvertierung der Impulsstände in das Profibus DP Protokoll
    Offerlist Tender Text

BCM 8 M-Bus

For the combined recording of 8 S0 pulse counters and machine running times. The multiocounter module is designed for data transmission in the M-Bus format.

    Characteristics
    • Counter module with 8 separate S0 channels according to EN 62053-31
    • Communication variant: M-Bus
    • DIN rail mounting according to IEC 60715
    • 6 TE width
    • Suitable for contacts and open collector transistors
    • Channels for counting machine running times can be programmed (depending on the model)
    Technical data
    Case according to DIN 43880, material PPO self -extinguishing
    Dimensions B: 106 mm (6TE), H: 115 mm (inkl. Steckverbinder), T: 63 mm
    Assembly on DIN rail according to EN 50022
    Protection class IP20
    Connections S0 inputs: 2 x 8 pin. Screw plug-in terminals, pitch 5.08, bus: 2 x 2-pole. Screw-in terminals, pitch 3.81
    Supply 24 VDC +/- 5%
    Current consumption max. 350 mA bei 24VDC
    Inputs 8 x S0 Class A according to EN 62053-31
    S0 voltage 18V idle
    S0 line current 8 x ca.17 mA max.
    Active input IS0 > 10mA
    Inactive input IS0 < 2mA
    Debounce time ca. 8 msec
    Temperature range -10 °C bis -55 °C
    Baud rates 300, 2400, 9600 Bit/s (Default: 2400 Bit/s)
    Bus load 1 unit load (approx. 1.5mA)
    Number of logical 4M bus slaves 4
    Slave function 8 x Counter, 32Bit dual
    Variant and tender text
    BCM 8 Modbus Item number: 002639
    Impulserfassungsmodul für bis zu acht S0 Impulszähler
    und Konvertierung der Impulsstände in das Modbus RTU Protokoll
    Offerlist
    Tender Text

LoRaWAN-Gateway Outdoor 

The LoRaWAN gateway is designed for outdoor use and enables the wireless connection of LoRaWAN sensors (nodes). The gateway contains SX1301 + 2x 1257 LoRaWAN concentrators which offers 10 programmable parallel demodulation paths.

    Characteristics
    • Connection of LoRaWAN sensors
    • SX1301 LoRaWAN concentrator
    • Protection class IP65
    • Incl. Fiber optic antenna
    Technical data
    Radio frequency 868 MHz
    Power supply PoE or external power supply 230/12 VDC
    Antenna external fiber optic antenna for LoRa RF
    Connection TCP/IP (RJ 45)
    Protection class IP 65 Outdoor-Gateway
    Dimensions in mm (H x L x W): 490 x 120 x 190
    Variant and tender texts
    LoRaWAN-Gateway Outdoor Item number: 004900

    Funkfrequenz: 868 MHz
    Spannungsversorgung: PoE oder externes Steckernetzteil 230/12 VDC
    Antenne: externe Glasfaserantenne für LoRa RF
    Anschluss: TCP/IP (RJ 45)
    Schutzklasse: IP 65 Outdoor-Gateway
    Offerlist Tender Text

BIP IV Modul

The BIP IV is an intelligent gateway and enables the UBN series measuring devices, BME energy meters and devices with Modbus RTU protocol to be connected to the Profibus. The interface has a Profibus-DP standard interface according to EN50170 based on the intelligent Profibus controller SPC3 as well as another RS485 interface, the device bus.

    Characteristics
    • Profibus gateway for connecting devices from the UBN series and energy meters from the BME series via Modbus RTU
    • Sub-networking of up to 32 Modbus participants possible
    • Communication variant: Profibus DP
    • DIN rail mounting according to IEC 60715
    • 3 TE width
    Technical data
    Case Insulated plastic housing for mounting on DIN rails of type DIN EN 50022 (TS35)
    Protection class IP 20 for front panel and IP 20 for terminals
    Temperature range Ambient temperature – 10°C to 55°C
    Storage temperature – 20°C to 60°C
    Supply 24 VDC +/- 5% / 50mA
    Connection elements Screw terminals (type K) for conductors up to 4 mm2 according to VDE 0100 and VGB 4
    Weight ca. 80g
    Interfaces Profibus SUB-D 9pol. according to EN 50170, baud rates up to 12MBit/s

    RS 485 (device bus) for measuring device connection

    The interfaces are electrically isolated from each other

    Occupancy of the decentralized peripherals 32 bytes inputs, 32 bytes outputs
    Transfer rates 9600 bit/s for devices type code 1-5

    19200 bit/s bit/s for devices type code 6 (Modbus RTU) and type code 7 (meter BME)

    Variants
    BIP IV Modul Item number: 004356
    Berg Interface für Profibus (4.Generation)
    zur Integration von BME Modbus Zählern
    oder UBN Netzanalysatoren an den
    Siemens Profibus DP
    Offerlist
    Tender Text

    BIP-MANAGER TIA Item number: 004385
    Vorprogrammierter TIA Funktionsbaustein für eine
    S7-1200/1500 Steuerung zur Auslesung von Messdaten
    der am BIP IV angebundenen Berg Messgeräte
    Offerlist
    Tender Text

    BIP-MANAGER V4 Item number: 002694
    Vorprogrammierter STEP-7 Funktionsbaustein für eine
    S7-300/400 Steuerung zur Auslesung von Messdaten
    der am BIP IV angebundenen Berg Messgeräte
    Offerlist
    Tender Text

BAC2 analogue counter

The BAC2 module is a 2-channel high-resolution measuring module for analog values and designed for passive 2-wire measuring transducers 4-20mA (flow, temperature, humidity, pressure, level, etc.) or active measuring signals 0(4)-20mA. When using passive 2-wire transmitters, the measuring transducers are supplied by the BAC2.

    Characteristics
    • High measurement resolution (measuring interval 200ms with a resolution of 15 bits)
    • Energy values are saved in the EEPROM in the event of a power failure
    • Data communication: Modbus RTU
    • Parameterization is carried out using the editor integrated in BAC2
    • DIN rail mounting according to IEC 60715
    • 3 TE width
    Technical data
    Case: Insulated plastic housing for mounting on DIN rails of type DIN EN 50022 (TS35)
    Protection class: IP 20 for front panel and IP 20 for terminals
    Dimensions: W:53 mm (3TE), H:90 mm, D:58 mm (without Profibus plug)
    Supply: 24VDC +/- 5% ca. 100mA
    Connection elements: Screw terminals for conductors up to max. 4 mm2
    Weight: ca. 90g
    Analog inputs: 2, electrically isolated, but not from each other
    Measuring range: 2 x 0(4)-20mA
    Internal burden: 102.4 ohms, adjustable
    Sensor supply: approx. 22V channel, current limited to 27..28mA (short-circuit proof)
    Resolution: 15Bit (32767 counts), standardized to 0..10000 by software
    Samplerate: 5 / sec
    Nonlinearity: 10ppm Full Scale Range
    Temperature drift: -13ppm/°C, measured in the ambient temperature range 20-50°C
    Energy meter: 2 x 32Bit
    Real time clock: batteriegepuffert, Genauigkeit 3,5ppm
    Load profile memory: Memory size 4 megabytes, sufficient for approx. 262,000 records
    Data interface: RS485, Modbus RTU protocol
    Variants
    BAC2 Modbus Item number: 004412
    Modul zur Integration von zwei 4…20mA Signalen zu einem Verbrauchswert
    Datenübertragung im Modbus RTU Bus Format
    Offerlist Tender Text

    BAC2 M-Bus Item number: 004413
    Module for integrating two 4…20mA signals into one consumption value
    Data transmission in M-Bus format
    Offerlist Tender Text

Send Mail
Send Mail info@berg-energie.de
Contact now
Contact now
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.